Red
CONNEX
TM
AN-80i
User
Manual
70-00072-01-04b
Proprietary Redline Communications © 2007
October 31, 2007
Page 50 of 94
4.4.4 Connection
Screen
Click
New
Connection
in the left-hand menu to display a blank
Connection
configuration
screen. To view an existing
Connection
, click
Groups
or
Links
, and then click
Expand
to
display the
Connections
for that
Group
/link, and then click
Config
for the desired
Connection
. At least one
Connection
must be created for each VLAN to be transported
across the wireless switch. The
Connection
configuration defines how Ethernet packets are
handled on the subscribers. Each subscriber can participate in multiple VLANs.
Figure 26: PMP - Connection Configuration Screen
Connection Configuration
Connection Name
: Enter a name for this
Connection
(15 characters max.). The
Connection
name is displayed on configuration and statistics screens.
Connection ID
: (Read only) A unique
Connection
ID is generated automatically when a
new link is created. The
Connection
ID number is required when assigning this
Connection
to a
Group
.
Connection
Tagging Mode
: Select the packet processing at the subscriber.
Tagged
: Select tagged to associate a unique VID with this
Connection
. Further
processing is performed at the sector controller based on the
Group
configuration
associated with this
Connection
.
