background image

 

 

 

 

10 

CAUTION! 

 
The  vehicle  is  not  suitable  for  children  12  months  or 
younger. 
Ensure that the safety pin is secured with the spring clip. 
Ensure that all the locking devices are engaged before use.

 

                                                   

  WARNINGS! 

 

Immediately  discard  all  plastic  bags  and  plastic  wrapping 
materials.  To  prevent  injury,  please  use  extreme  care  when 
folding and unfolding the trailer/jogger/stroller. 
 

 

ATTACHING AND REMOVING THE TOP COVER                                                           

 
Position the top cover over top of the trailer so that the roll-up 
window  with  bug  mesh  screen  is  to  the  front  of  trailer.    Feed 
the cover over the push-bar post holes so they protrude through.   
Fasten the rear of cover with Zipper/Velcro strap and the bottom 
corners  of  the  cover  with  Velcro  and  stretch  it  until  it  is  fully 
covering the trailer.     
 
Reverse the instructions to remove the top cover. 
 
The top cover is designed to keep passengers and cargo dry and 
warm in inclement weather and protects from flying debris. The 
rain PVC cover can be rolled up to allow for added ventilation 
in  hot  weather  or  rolled  down  to  allow  for  added  warm 
protection  in  the  cold  weather.  Velcro  closures  keep  the  rain 
cover out of the way when rolled up. 

Summary of Contents for BKTRLR-SAMS-1
























Reviews: