13
CAUTION!
There should be a minimum distance of 1.5” (40mm)
between the top of the child’s head (without a helmet on)
and the roof of cabin. If the child’s head protrudes above
the upper crossbeam when seated, they are too tall to ride
safely in the trailer. It is recommended that a helmet
according to EN 1078 should be worn.
WARNINGS!
Avoid serious injury from falling or sliding out. Children
should always wear the harness and shoulder straps.
Always adjust the harness to a snug and secure position for
the child to prevent slipping into the leg openings and
risking strangulation. Always check the child’s position
and safety strap security. Never operate without securing
passengers in the 5-point harness. Unrestrained passengers
can affect bike handling; and they may be more likely to be
injured in the event of an accident.
When one child is riding, seat him/her in the center. Do
not
carry
extra
children
or
belongings
on
the
trailer/jogger/stroller.
ATTACHING AND REMOVING THE WHEELS
Lift the rear of the frame enough to allow you to insert the
wheel axle into the hole in the side of the frame. Insert the
wheel axle by pushing on the hub while depressing the
spring-button on the underside of the frame until you hear an
audible click. Check that the axle is secure and inserted fully
