background image

RedMax

STANDARD LIMITED WARRANTY STATEMENT

ALL Products Sold on or after 1/01/2009

All RedMax Brand Products

RedMax

Limited Warranty, provides to the 

ORIGINAL

retail purchaser that this 

RedMax

product is free from 

DEFECTS

in 

MATERIAL

and

WORKMANSHIP

under normal use and maintenance from the date of retail purchase. 

RedMax

agrees to repair or replace at our discretion,

any defective product, free of charge at any authorized 

RedMax

servicing dealer using original 

RedMax

replacement parts, within the listed

below application time periods, limitations and exclusions. 

THIS LIMITED WARRANTY IS EXTENDED TO THE FIRST, ORIGINAL RETAIL

PURCHASER ONLY, AND IT IS NOT TRANSFERABLE TO SUBSEQUENT OWNERS.

This warranty is separate from the Emission Control

Warranty Statement supplied with your new product. Please consult your Emission Control Warranty Statement for details.

PRODUCT WARRANTY PERIOD

PRODUCTS PURCHASED FOR NON-INCOME PRODUCING USE (Home Owner)

Complete units purchased for residential, or non-income producing use, will be covered by this limited warranty for two 

(2) years

from the date

of 

retail

purchase. The electronic ignition module, the brush cutter/trimmer drive shafts, are warranted for the life* of the product on parts only.

PRODUCTS PURCHASED FOR COMMERCIAL, INSTITUTIONAL, AGRICULTURAL, INDUSTRIAL, OR INCOME

PRODUCING USE

Complete units used for commercial, institutional, agricultural, industrial, or income producing use will be covered by this limited warranty for a
period of two 

(2) years

, from the date of 

retail

purchase. Chainsaws, TR2301S/2350S, CHT2200/2250, and Sprayers are covered for one 

(1)

year. Exceptions are Models:

GZ400, BT250/280, BC250/280, HB250/280, and HE250F. These 

EXCEPTIONS

are covered for ninety 

(90)

days

. The electronic ignition module and the brush cutter/trimmer drive shafts, are warranted for the life* of the product on parts only.

RENTAL APPLICATION

Complete units for rental use will be covered against defects in material and workmanship for a period of 

90 days

from the date of purchase.

The following carry No Rental Warranty. They are:

GZ400, BT250/280, BC250/280, TR2301S/2350S, HB250/280, CHT2200/2250

and HE250F. These products have 

NO

Rental Warranty.

RedMax

liability under the 

"Lifetime"

coverage is limited to furnishing parts only after the Standard Warranty coverage expires as specified

under the 

PRODUCT WARRANTY PERIOD

section of this warranty statement. 

"Lifetime"

free of charge parts is only for a period of seven (7)

years after the last date of the complete unit's final production.

This warranty does not cover damage other than that resulting from 

defects in material or workmanship

RedMax DOES NOT OFFER AN

OVER THE COUNTER EXCHANGE PROGRAM

. Any product sold, serviced or re-built by other than a 

RedMax

Authorized Servicing Dealer, is

sold as is without

RedMax

standard warranty coverage. Repair parts and accessories replaced under this warranty are warranted only for the

BALANCE

of the original unit or accessory warranty period.

All parts or products replaced under warranty become the property of 

RedMax

.

PURCHASED REPAIR PARTS, SHORT BLOCKS AND ACCESSORIES

These items carry a 90-day residential, or non-income producing use, and 90-day commercial, institutional, agricultural, industrial, income
producing, or rental application warranty.

CUTTING ATTACHMENTS SUPPLIED WITH PRODUCTS

All original equipment cutting attachments used in residential, or non-income producing use, such as, but not limited to, bars, chains, sprockets,
blades, nylon trimmer heads, will be covered for failures due to defects in material or workmanship for a period of 

60 days

from the original

product purchase date. Any misuse from contact with, rocks, or other non-approved materials and/or structures is not covered by this warranty.
When used in a commercial, institutional, agricultural, industrial, income producing or rental application, the cutting attachment warranty is for 

30

days

.

All Maxtreme Series, Split Shaft attachments carry the same warranty duration as the units they are designed to fit.

DISCLAIMER OF IMPLIED WARRANTIES

Any implied warranty is limited to the duration of the limited warranty. Otherwise, this limited warranty is in lieu of all other expressed or implied
warranties, including any warranty of FITNESS FOR A PARTICULAR PURPOSE OR USE and any implied warranty of 

MERCHANTABILITY

otherwise applicable to this product. 

RedMax

and its affiliated companies shall not be liable for any special incidental or consequential damage,

including lost profits. There are no warranties extended other than as provided herein. This warranty may be modified only by 

RedMax

.

ATTENTION TWO-STROKE ENGINE POWERED PRODUCT OWNERS

RedMax – Hi-Performance 2-Stroke engines produce higher HP (horse power) outputs as compared to standard Home Owner Duty or Light
Commercial Duty production engines offered by most manufacturers. To help insure trouble free performance of the unit, it is required to use oil
which meets the ISO-L-EGD Standard per ISO/CD 13738 and one that is 

registered

under JASO M345/FD Standards. 

RedMax MaxLife™

Synthetic blend Two-Stroke Oil

is a premium two-stroke oil specifically formulated to meet ISO-L-EGD (ISO/CD 13738) and JASO M345/FD

Standards. The use of 

un-registered

oils designed for other applications, such as for outboard motors or lawnmowers, or low RPM, low HP

output engines, can result in severe engine damage, and void your two-stroke engine warranty. This Hi-Performance Air Cooled 2-Stroke
engine requires the use of 

MINIMUM 89 Octane (Mid grade or Premium)

clean gasoline. If octane rating of the Mid Grade gasoline is lower

than 89 octane USE Premium Unleaded Gasoline. Warning: Gasoline with octane rating lower than 89 will greatly increase engines operating
temperature. Low octane gasoline will cause detonation (knock) resulting in piston seizures and major internal engine component damage.

U S

Summary of Contents for BCZ2450S
























Reviews: