background image

Engine Failures caused by operating engines on gasoline with octane rating lower than 89 

are not covered

by the RedMax Two-Stroke engine

warranty.
(Emission related parts only are covered for two years, regardless of two-stroke oil used, per the statement listed in the EPA or California
Emission Defect Warranty Explanation.)  

THIS WARRANTY DOES NOT INCLUDE, OR COVER DAMAGE TO THE UNIT OR ENGINE CAUSED BY:

1.

Lack of lubrication or engine failure, due to the use of two-stroke oils that do not meet the ISO-L-EGD (ISO/CD 13738) and are 

not

registered

 to meet JASO M345/FD Standards. Engine problems due to inadequate lubrication caused by failure to use an ISO-L-EGD

compliant and JASO M345/FD 

Registered

oil, 

WILL VOID

the 

RedMax

two-stroke engine warranty. RedMax MaxLife™ Synthetic blend

Two-Stroke Oil meets the ISO-L-EGD and 

is registered

to JASO Standard M345/FD.

2.

Damage caused by use of gasohol, containing methanol (wood alcohol), or gasoline containing 

LESS than 89 OCTANE

. Only use

gasolines which contain 

89 octane or Higher

. Gasohol which contains a maximum 10% ethanol (grain alcohol) or 15% MTBE

(methyl/tertiary/butyl/ether) is also approved. The prescribed mixing ratio of gasoline to oil is 50:1 and is listed on the 

RedMax

oil label and

covered in your operator's manual.

3.

Engine damage caused by use of ether or any starting fluids. Damage caused by pressure or steam cleaning the unit.

4.

Overheating and Detonation damage caused by use of spark plugs other than those meeting emissions performance requirements listed in
the Operators Manual.

5.

Damage caused by tampering with engine speed governor or emission components, or running engines above specified and
recommended engine speeds as listed in your operator's manual.

6.

THIS WARRANTY DOES NOT COVER DAMAGE TO THE UNIT OR ENGINE CAUSED BY:
Operation of the unit with improperly installed/removed cutting shields, guards or safety devices.

7.

Damage caused by removed/damaged air filter, dirt, abrasives, salt water, moisture corrosion, rust, varnish, stale fuel, or any adverse
reaction due to incorrect storage procedures.

8.

Defects, malfunctions or failures resulting from abuse, misuse, neglect, modifications, alterations, normal wear, improper servicing, use of
unauthorized attachments, including failure to provide or perform required maintenance services as prescribed in the operators manual.

Preventative maintenance as outlined in the operator's manual is the owner's/ customer's responsibility.

9.

Failures due to improper set-up, pre-delivery service or repair service by anyone other than an authorized 

RedMax

servicing dealer during

the warranty period.

10. Certain parts and other items are not warranted, including but not limited to: spark plugs, filters, lubricants, starter cords, sprockets, and

debris bags. Overheating or carbon scoring failures due to restricted/clogged exhaust port, blocked spark arrester screen, or combustion
chamber.

11. Set-up and pre-delivery service, engine tune-ups, including natural discoloration due to ultraviolet light.
12. Adjustments after the first (30) thirty days of purchase and beyond, such as carburetor adjustment and throttle cable adjustment.
13. Damage to gears or gear cases caused by dirt contaminated grease, use of incorrect type of gear case grease, and/or failure to comply

with recommended greasing intervals.

14. Damage caused by sprayers pumping or spraying caustic or flammable materials, lack of or broken strainers.
15. Additional damage to parts or components due to continued use after operational problem or failure occurs.

Should operational problem or failure occur, the product should not be used, but delivered as is to an authorized 

RedMax

Servicing Dealer.

IMPORTANT OWNER'S RESPONSIBILITY

The owner shall demonstrate 

reasonable care and use

, and follow preventative maintenance, storage, fuel and oil usage as prescribed in the

enclosed operator's manual. Should a product difficulty occur within the applicable warranty period, you must, at your expense, deliver or ship
your 

RedMax

unit to an authorized 

RedMax Servicing Dealer

only for warranty repairs and arrange for pick-up or return of your unit after the

repairs have been made. If you do not know the location of your nearest authorized 

RedMax Servicing Dealer

, consult your telephone yellow

pages or call 

RedMax

, at 1-800-291-8251 during the hours of 8:00 am to 5:00 pm Eastern Standard time, or visit 

www.RedMax.com

. Should

you require assistance or have questions concerning this Warranty Statement, you may contact us at 1-800-291-8251 during the hours of 8:00
am to 5:00 pm Eastern Standard Time or contact us through the web at 

www.RedMax.com

.

IMPORTANT OWNER'S RESPONSIBILITY

IT IS A CUSTOMER'S AND/OR DEALER'S RESPONSIBILITY TO COMPLETE AND RETURN WITHIN 10 DAYS OF THE DATE OF
PURCHASE, THE WARRANTY REGISTRATION CARD SUPPLIED WITH YOUR REDMAX PRODUCT.

YOUR RECEIPT OF PURCHASE INCLUDING DATE, MODEL AND 

ENGINE

SERIAL NUMBER MUST BE MAINTAINED AND PRESENTED

TO AN AUTHORIZED RedMax SERVICING DEALER FOR WARRANTY SERVICE. 

PROOF OF PURCHASE RESTS SOLELY WITH THE

OWNER-CUSTOMER

. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE

LIMITATIONS MAY NOT APPLY TO YOU. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. THIS WARRANTY IS GIVEN 

ONLY

BY 

RedMax

OUR ADRESS is, 7349 Stateville Rd. Charlotte, NC 28269

1/2009

U S

Summary of Contents for BCZ2450S
























Reviews: