US-4
BCZ400SW
3. Warning labels on the machine
For safe operation and maintenance, symbols
are carved in relief on the machine. According
to these indications, please be careful not to
take a mistake.
(a) The port to refuel the "MIX GASOLINE"
Position:
FUEL TANK CAP
(b) The direction to close the choke
Position:
AIR CLEANER COVER
(c) The direction to open the choke
Position:
AIR CLEANER COVER
(1) Read owner/operator manual before operating this machine.
(2) Wear head, eye and ear protection.
(3) Warning! Danger of kickback.
(4) Beware of thrown objects.
(5) Warning/Attention
(6) Keep all children, bystanders and helpers 15 meters away from the brushcutter
If warning label peel off or become soiled and impossible to read, you should contact the dealer from
which you purchased the product to order new labels and affix them in the required location(s).
Never modify your brushcutter.
We won't warrant the machine, if you use the remodeled brushcutter or you don't observe the
proper usage written in the manual.
WARNING
IMPORTANT
4. Symbols on the machine
15m (50ft)
(1)
(2)
(3)
(4)
(5)
(6)
*1: The year will be changed every year of manufacturing.
*2: The initial will be changed every year of manufacturing.
*3: SP : Sealed tank made of HDPE or PE.
USE JASO FD OR ISO L-EGD GRADE 50:1 OIL
MANUFACTURED:
THIS ENGINE MEETS U.S. EPA AND CALIFORNIA
EXH/EVP REGS FOR
2011*
1
S.O.R.E.
ENGINE FAMILY : BHQZS.0404GH*
2
DISPL.: 40cc
EMISSION CONTROL SYSTEM : EXH;EM/EVP;SP*
3
COMPLIANCE PERIOD : 300 HOURS
REFER TO OPERATOR'S MANUAL FOR MAINTE-
NANCE, SPECIFICATIONS AND ADJUSTMENTS.
EMISSION CONTROL INFORMATION
■
EMISSION CONTROL
An emission control label is located on the engine.
