BEFORE USING FOR THE FIRST TIME
1. Remove all packaging materials including those that may be
inside the toasting slots or toasting lever slots.
2. Wipe the exterior with a damp cloth. Dry thoroughly. Do not use
abrasive cleaners.
3. Do not put the Toaster, cord or plug in water.
4. Be sure crumb tray is pushed all the way into the back of the
Toaster and the toasting levers are in the UP position.
5. Unwrap the power cord from cord storage area on the
the toaster and plug into a 120V AC outlet.
6.Turn the browning selector knob to (1), the lightest setting.
Lower the toasting lever s until they lock in place. Operate without
bread once or twice to burn off any manufacturing r esidue. You
may notice an alight amount of smoke; this is normal and will stop
as the heating elements continue to heat.
AUTOMATIC CENTERING GUIDES
1. Lowering the toasting lever closes the centering guides, and
holds the bread or toaster food centrally in the toasting slots.
Note: The toasting lever(s) will not lock down unless the Toaster is
plugged into a 120V AC electrical outlet.
TOASTING INSTRUCTIONS
1. Make sure crumb trays are pushed all the way into the back of
the Toaster and the toasting levers are in the UP position.
2. Make sure no bread or other objects are inside the toasting
slots. Place Toaster on a flat, level, heat resistant surface.
3. Plug the power cord into a 120AC electrical outlet.
4. Position the browning selector knob to desired setting(s). To
test toasting times for browning, it is best to use both toasting
slots’ position the browning selector know between (3) and (4)
medium; then adjust each subsequent toasting to your preference.
underside of
