REDSTONE 5906101924, Manual

20 | GB

•  When releasing the hose coupling, hold the hose 

coupling piece with your hand. 

•  This way, you can protect yourself against injury 

from the rebounding hose.

•  Wear safety goggles and a respirator when working 

with the compressed air pistol. Dusts are harmful to 

health! 

Foreign objects or blown off parts can easily 

cause injuries.

•  Do not blow at people with the blow-out pistol and 

do not clean clothes while being worn. Risk of in-

jury!

Safety instructions when using spraying attach-

ments (e.g. paint sprayers):

•  Keep the spray attachment away from the com-

pressor  when  filling  so  that  no  liquid  comes  into 

contact with the compressor.

•  Never spray in the direction of the compressor 

when using the spraying attachments (e.g. paint 

sprayers). Moisture can lead to electrical hazards!

• 

Do not process any paints or solvents with a flash 

point below 55° C. Risk of explosion!

•  Do not heat up paints or solvents.  Risk of explo-

sion!

•  If hazardous liquids are processed, wear protective 

filter units (face guards).

 Also, adhere to the safety 

information provided by the manufacturers of such 

liquids.

•  The details and designations of the Ordinance on 

Hazardous Substances, which are displayed on the 

outer packaging of the processed material, must be 

observed. Additional protective measures are to be 

undertaken if necessary, particularly the wearing of 

suitable clothing and masks.

•  Do not smoke during the spraying process and/or 

in the work area. Risk of explosion! Paint vapours 

are easily combustible.

•  Never set up or operate the equipment in the vicin-

ity of a fire place, open lights or sparking machines.

•  Do not store or eat food and drink in the work area. 

Paint vapours are harmful to your health.

• 

The  work  area  must  exceed  30  m³  and  sufficient 

ventilation must be ensured during spraying and 

drying.

•  Do not spray against the wind.  Always adhere to 

the regulations of the local police authority when 

spraying combustible or hazardous materials.

•  Do not process media such as white spirit, butyl 

alcohol and methylene chloride with the PVC pres-

sure hose. These media will destroy the pressure 

hose.

•  The work area must be separated from the com-

pressor so that it cannot come into direct contact 

with the working medium.

Operation of pressure vessels

•  Anyone who operates a pressure vessel must keep 

this in good working order, operate and monitor it 

correctly, perform the necessary maintenance and 

servicing works immediately and implement safety 

measures as required according to the circum-

stances.

16. Attention!

 - For your own safety, only use accessories and 

additional equipment that are indicated in the op-

erating manual or have been recommended or 

indicated by the manufacturer. Use of other tools 

or accessories that those recommended in the 

operating manual or in the catalogue could rep-

resent a personal danger to you.

17. Noise

 - Wear hearing protection when using the com-

pressor.

18. Replacing the connection line

 - If the connection line is damaged, it must be re-

placed by the manufacturer or an electrician to 

avoid danger. There is a risk of electric shock

19. 

Inflating tyres

 -

Check the tyre pressure immediately after filling 

using a suitable pressure gauge, e.g. at a petrol 

station.

20. Street-legal compressors in construction site op-

eration

 -

Ensure that all hoses and fixtures are suitable for 

the maximum permissible working pressure of 

the compressor.

21. Set-up location

 -

Only set up the compressor on a flat surface.

22. It is recommended to equip the feed hoses with a 

safety cable in case of pressure above 7 bar, e.g. 

using a wire cable.

23. Avoid over-stressing the piping system by using 

flexible hose connections to prevent kinking.

24. Use a residual current circuit breaker with a trig-

ger current of 30 mA or less. Use of an RCD re-

duces the risk of electric shock.

m

 WARNING! 

This power tool generates an elec-

tromagnetic field during operation.

This field can im

-

pair active or passive medical implants under certain 

conditions. In order to prevent the risk of serious or 

deadly injuries, we recommend that persons with 

medical implants consult with their physician and the 

manufacturer of the medical implant prior to operat-

ing the power tool.

ADDITIONAL SAFETY INSTRUCTIONS

Observe the corresponding operating manuals 

of the respective compressed air tools / com-

pressed air attachments! 

The following general in-

structions must also be observed:

Safety instructions for working with compressed 

air and blasting guns

• 

Ensure there is sufficient distance to the product, 

at least 2.50 m, and keep the compressed air tools 

/ compressed air attachments away from the com-

pressor during operation.

•  The compressor pump and lines can become very 

hot during operation. Touching these parts will burn 

you.

•  The air which is sucked in by the compressor must 

be kept free of impurities that could cause fires or 

explosions in the compressor pump.