background image

22

Inspect and tighten all parts of the elliptical exerciser
regularly. Replace any worn parts immediately. 

To clean the elliptical exerciser, use a damp cloth and
a small amount of mild soap. 

Important: To avoid

damage to the console, keep liquids away from
the console and keep the console out of direct
sunlight.

HOW TO LEVEL THE ELLIPTICAL EXERCISER

If the elliptical
exerciser rocks
on your floor dur-
ing use, turn one
or both of the
leveling feet
beneath the rear
stabilizer until
the rocking
motion is elimi-
nated.

HANDGRIP PULSE SENSOR TROUBLESHOOTING

• Avoid moving your hands while using the handgrip

pulse sensor. Excessive movement may interfere
with heart rate readings.    

• Do not hold the metal contacts too tightly; doing so

may interfere with heart rate readings.

• For the most accurate heart rate reading, hold the

metal contacts for about 30 seconds.

• For optimal performance of the handgrip pulse sen-

sor, keep the metal contacts clean. The contacts
can be cleaned with a soft cloth—

never use alco-

hol, abrasives, or chemicals to clean the con-
tacts. 

HOW TO ELIMINATE FLEXING IN THE CENTER OF
THE ELLIPTICAL EXERCISER

If the elliptical exerciser flexes in the center during
use, turn the center foot beneath the frame (see the
drawing at the left) until the flexing is eliminated.

HOW TO ADJUST THE BELT

If the pedals slip
while you are
pedaling, even
while the resis-
tance is adjusted
to the highest
setting, the belt
may need to be
adjusted. To
adjust the belt,
first carefully pry
off the left Disc
Cover (13) using a flat screwdriver. Next, remove the
four screws (not shown) from the center of the left
Disc (12). Gently rotate the Disc Cover and the Disc
away from the elliptical exerciser.

Loosen, but do
not remove, the
three 1/4" x
19mm Button
Screws (114).
Insert the shaft of
a screwdriver
downward
between the
Idler (47) and the
Idler Pulley (48).
Pull the top of the
screwdriver
toward the rear of the elliptical exerciser until the Belt
(96) is tight, and then tighten the three Button Screws. 

Reattach the left disc with the four screws and then
reattach the left disc cover.

Leveling

Feet

Center

Foot

47

13

12

48

114 96

M

AINTENANCE AND

T

ROUBLESHOOTING

Summary of Contents for 100 Zx Elliptical





























Reviews: