14
11. With the help of a second person, hold the con-
sole assembly near the Left Handrail (76) and
the Right Handrail (not shown).
Connect the Upright Wire (81) to the console
wire.
See the inset drawing. The connectors
should slide together easily and snap into
place.
If they do not, turn one connector and try
again.
IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER.
Remove the wire tie from the
Upright Wire.
Connect the ground wires from the console
assembly to the Console Ground Wires (98).
Console
Assembly
Console
Wire
Wire
Tie
Ground
Wires
81
76
81
Console
Wire
10.
Insert the Console Frame (96) into the Left and
Right Handrails (76, 77). Attach the Console
Frame with four 1/4" x 1" Screws (8) and four
1/4" Star Washers (11);
do not tighten the
Screws yet. Be careful not to pinch the
Upright Wire (81).
First, tighten the two indicated #10 x 3/4"
Screws (6) in each end of the Crossbar (102);
do not overtighten the Screws.
Then, tighten
the other two #10 x 3/4" Screws (6) in each end
of the Crossbar.
Tighten the four 1/4" x 1" Screws (8), four
5/16" x 1" Flat Head Screws (4), and the two
5/16" x 1" Bolts (5).
10
96
76
77
8
11
8
11
First
First
6
6
4
5
4, 5
81
102
11
98
Summary of Contents for 710 Elliptical
Page 5: ...5...
