23
HOW TO USE THE INFORMATION MODE
The console features an information mode that allows
you to view treadmill usage information, select a sys-
tem of measurement for the console, and turn on and
turn off the demo mode. The information mode also al-
lows you to adjust the settings of the television and to
save channels into the television’s memory.
Follow the steps below to use the information mode.
1.
Press the Rate/Wt. decrease button while in-
serting the key into the console.
When the information mode is selected, the lower
part of the screen will show the total number of
miles or kilometers that the walking belt has
moved (Distance) and the total number of hours
that the treadmill has been used (Time).
In addition, the center of the display will show the
word “English” for English miles or “Metric” for
metric kilometers. Press the Speed increase but-
ton to change the unit of measurement if desired.
IMPORTANT:
If the words “Demo On” appear in
the center of the display, the “demo” mode is se-
lected. This mode is intended to be used only
when a treadmill is displayed in a store. When the
demo mode is selected, the power cord can be
plugged in, the key can be removed from the con-
sole, and the displays on the console will automati-
cally light in a preset sequence. The buttons on the
console will not function.
If the words “Demo On”
appear on the screen when the information
mode is selected, press the Speed decrease
button so the words “Demo Off” appear.
While the information mode is selected, you can
select an equalizer setting to optimize the sound
of your personal music if desired. To select an
equalizer setting, first press the Start/Stop button.
Next, press the Speed increase and decrease but-
tons to choose among Default, Classic, Country,
Techno, or Rock. When you have selected a set-
ting, remove the key from the console. Then,
press the Rate/Wt. decrease button while reinsert-
ing the key into the console.
2.
Press the TV button and adjust the brightness,
contrast, color, sharpness, and/or hue of the
television.
When the TV button is pressed, the brightness level
indicator will appear on the television screen. Press
the Volume (VOL) buttons to adjust the brightness
setting if desired.
Next, press the Channel (CHAN) buttons until the
contrast, color, sharpness, or hue level indicator ap-
pears. Adjust the settings, if desired, by pressing
the Volume buttons.
3.
Press the TV button again and add or delete
cable channels.
Note: Complete this step only if you are using ana-
log cable. After all valid cable channels available
in your area have been saved into the television’s
memory (see step 5 on this page), you can manu-
ally add channels or delete unwanted channels.
To add or delete a cable channel, first press the
Channel buttons until the desired channel number
appears on the screen. Then, press the Volume
increase button to add the channel, or the Volume
decrease button to delete the channel. Continue
this process until you have added all desired
channels and deleted all unwanted channels.
4.
Press the TV button again and select a cable
connection.
If you have connected a CATV cable, one of the
three Cable settings should be selected; try all
three Cable settings, if necessary, to find the opti-
mal setting. Press the Volume increase button to
select the Standard Cable setting, the Channel
decrease button to select the Cable IRC setting,
or the Channel increase button to select the Cable
HRC setting.
5.
Press the TV button again and save cable
channels into the television’s memory.
When the TV button is pressed, the television will
begin scanning all of the cable channels available
in your area. When no cable signal is detected on
a channel, the channel will be skipped. When a
cable signal is detected, the channel will be saved
into memory and the next channel will be se-
lected. This process will continue until the highest
channel is reached.
Do not remove the key
while the television is scanning channels.
Note: If you are viewing channels through an ex-
ternal source such as a cable box or a VCR, the
television will save only the channel used by the
external source.
6.
When you are finished using the information
mode, remove the key from the console.
To exit the information mode at any time (except
while the television is scanning channels), remove
the key from the console.
