8
7. Using a paper towel, apply lubricant to one of the
Handlebar Uprights (27). Insert the Handlebar Upright
into the Left Handlebar (10).
Next, slide a Plastic Washer (73) onto a Pedal Bolt
(36). Insert the Pedal Bolt through the Bushings (35)
in the Left Pedal Arm (7) and the Brass Bushing (29)
in the Handlebar Upright (27). Next, tighten the Pedal
Bolt (36) into the left Crank Arm (38) and tighten a
1/2” Nylon Locknut (37) onto the Pedal Bolt.
Attach the other Handlebar Upright (not shown) and
the Right Pedal Arm (not shown) in the same manner.
8.
Make sure that all parts of the elliptical exerciser are properly tightened.
Place a mat under the elliptical
exerciser to protect the floor or carpet from damage.
27
7
10
36
73
35
29
38
37
7
MAINTENANCE
Inspect and tighten all parts of the elliptical exerciser
regularly. Replace any worn parts immediately.
For continued smooth operation of the elliptical exer-
ciser, the Stabiliser (4) should be kept clean. Using a
soft cloth and mild detergent, clean any dust and
residue that may build up where the Wheels (60) move
on the Stabiliser. Other components of the elliptical
exerciser can also be cleaned in this manner.
IMPORTANT: Never use abrasives or solvents to
clean the elliptical exerciser. To prevent damage to
the console, keep liquids away from the console
and keep the console out of direct sunlight.
4
60
Apply
Lubricant
All manuals and user guides at all-guides.com
