background image

   

 

 

 

 

 

 

 

Use-Scope: The exerciser may not be used by persons with a weight of over 100 kg. 

 

Use-Scope: This  product  is designed for  the physical exercise  by adults. Please ensure  that children 

only use it under adult supervision 

 

Use-Environment:  Ensure  that  those  present  are  aware  of  possible  hazards,  e.g.  movable  parts 

during training.   

 

Use-Environment: Ensure that sufficient space is available to use the home exerciser with 2m long x 

1m wide of clearance behind it and 1m of clearance for its flanks. 

 

Use-Environment: Place the home exerciser on an even, non-slippery surface. 

 

Product-Scope: This product is made for home  use only and tested up to a maximum body 

weight of 100 kilograms. 

 

Product-Performance: This treadmill is tested to the European Standard EN 957-1/6 HB. The 

equipment is not suitable for therapeutic training. 

 

Product-Scope:  Noise  compliance:  This  treadmill  meets  the  requirements  of  the  noise 

pollution standards. 

 

Product-Performance: The noise creation of treadmill is under 70db. 

 

Product-Maintenance:  For  keeping  the  run  quality  use  the  provided  silicon  spray  every 

month or after a working time of 100 kilometers between the belt and the running surface. 

 

Product-Maintenance:  Search  for  noisy  parts:  If  you  should  notice  unusual  noises,  like 

grinding, clacking etc. try to locate it and have it repaired by a professional. Make sure the 

treadmill is not used until after repairs have been made. 

 

Product-Feature: The speed can be changed by the computer.   

 

Use-Safety:  The  function  of  the  immobilization  method:  The  purpose  of  immobilizing  the 

treadmill is to prevent unauthorized use. This can be accomplished by removing the Safety 

Key from the console, unclipping it from the cord and putting it in a non-accessible place.   

 

Use-Safety: The emergency dismount: Follow the steps listed below if you experience pain, 

feel  faint  or  need  to  stop  your  treadmill  in  an  emergency  situation:  1.  Grip  handrails  for 

support      2. Step onto the lateral platform      3. Pull the Safety key off the console. 

 

Use-Safety: The function of the emergency stop: The Safety Key functions as the emergency 

stop. In an emergency situation, remove the Safety Key from the console and the treadmill 

will come to a stop.

 

Precautions 

Before assembling or using the treadmill, please read the following instructions carefully. They 

contain important information for use and maintenance of the equipment as well as for your 

personal safety. Keep these instructions in a safe place for maintenance purposes or for ordering 

spare parts.

 

Summary of Contents for i run se





























Reviews: