Reebok i-Trainer.SE
08
Customer Support 0800 440 2459
Reebok i-Trainer.SE
09
reebokfitness.info
Assembly
Handles
11. Remove the nut, bolt and washers pre assembled into the front of the pedal arm (fig.1).
12. Connect the handle to the front of the pedal arm using these components,
as illustrated (fig.2).
13. Cover the end of the handlebar by fitting the handlebar cover inners (216 & 217) to the
handlebar cover outers (712 & 713) as shown and secure using 4 x 802 screws (fig.3).
14. Repeat this process for the other handlebar.
Front
Rear
1
2
3
217
713
802
Upper Handlebars and Covers
15. Push the tops of the upper handlebars (213 & 260) into the handlebar tubes (fig.1)
16. Fix these using 4 x 290 bolts and 4 x 814 curve washers into each handlebar.
17. Once both handlebars are secure, place the handlebar covers (205 & 237)
over the joint, and fix using 2 x 802 screws into each handlebar.
1
237
814
205
260
213
802
802
290
You will require:
802
x 8
712
x 2
216
x 2
217
x 2
713
x 2
6mm
712
216
802
You will require:
213
x 1
260
x 1
802
x 4
205
x 2
237
x 2
814
x 8
290
x 8
5mm
RFE 4489_RE014201_iTrainerSE_UMFINAL.indd 8-9
25/06/2010 16:09
