TURN POWER ON
The On/Off switch for the treadmill is located next to the power supply cord at the back of the motor cover. Turn
this to the “ON” position firstly.
SAFETY KEY
The safety key is designed to cut the main power to the treadmill should you fall or in the event of an emergency.
Therefore, the safety key is designed to bring the treadmill to an immediate stop. At high speeds, it may be
uncomfortable and somewhat dangerous to come to a complete stop immediately. So, use the safety key as
emergency stop only. To bring the treadmill to a complete stop safely and comfortably, use the red stop button.
Your treadmill will not start unless the safety key is properly inserted into the key holder in the middle of the
console. The other end of the safety key should be securely clipped to your clothing so that in the case that you fall,
you will pull the safety key from the console, which will stop the treadmill immediately to minimize injury.
For your
safety, never use the treadmill without securing the safety key clip to your clothing. Pull on the safety key
clip ensure it is secured to your clothing correctly.
GETTING ON AND OFF THE TREADMILL
Be sure to take care when mounting or dismounting the treadmill. Try to use the handlebars while getting on or off.
While you are preparing to use the treadmill, do not stand on the running belt. Straddle the running belt by placing
your feet on both side rails of the treadmill deck. Place your foot on the belt only after the belt has begun to move
at a consistent slow speed.
During exercise, keep your body and head facing forward at all times. Never attempt to turn around on the
treadmill when the running belt is still moving. When you have finished exercising, stop the treadmill by pressing
the red stop button. Wait until the treadmill comes to a complete stop before attempting to dismount.
10
WARNING!
Never use this treadmill without first securing the safety key to your clothing.
CAUTION!
For your safety, step onto the belt when the speed
is no more than 0.8km/h/0.5mph.
CORRECT USE
CONT.