# STEP 3.
A) Place the Left Foot Rail (7) on the rear disk of the main frame (1) then fasten and secure with
flat washers (23)(19) and Nylon Nut (20). Slide Lower Hand Rail-L (5) into the Left Foot Rail (7)
then Insert the Sleeve Tube (21). Insert Hex Bolt (18) through Flat Washer (19) and Sleeve Tube
(21) then Fasten and secure with flat washer (19) and Nylon Lock Nut (20).
B) Place the Right Foot Rail (8) on the rear disk of the main frame (1) then fasten and secure
with Flat washers (23)(19) and Nylon Nut (20). Slide Lower Hand Rail-R (6) into the Foot Rail
Right (8) then Insert the Sleeve Tube (21). Insert Hex Bolt (18) through Flat Washer (19) and
Sleeve Tube (21) then Fasten and secure with flat washer (19) and Nylon Lock Nut (20).
C) Attach the 4 PVC Cap (74) over the Hex Bolt(18) and Nylon Lock Nut (20). Tighten them by
Screw (26). Put the Foot Pad (L+R) (36) to the position you like and tighten with Flat washer (38)
and Knob (37). There are three position too choose from.
26
26
L
R
L
26
R
L
R
8
