# STEP 4.
A) Connect right-hand pulse wire (31R + 32R) and left (31L + 32L) then insert the Front
handlebar (11) into the lower section and secure with 4 screws (26).
B) Connect computer sensor wire-upper portion (33) and middle Computer Wire (29). Connect
hand pulse upper wire (34) with the other section of the hand pulse middle wire (31 L+R) now
attach the computer (12) onto the plate on front post (4) and use 4 screws (39) to fasten.
# STEP 5.
A) Insert upper handlebar-L (9) to middle handlebar-L (5) then fasten and secure with round
head bolts (24) and Carriage Bolt (25).
B) Insert upper handlebar-R (10) to middle handlebar-R (6) then fasten and secure with round
head bolts (24) and Carriage Bolt (25).
C) Attach the Bottle Holder (80) on the front post with 2 screws (26).
D) Plug the Power Adaptor (35) into to the adaptor socket at the front of the unit then plug the
adaptor into your mains power socket.
Now you’re ready to use your Fusion Cross Trainer
9
