Installation Instructions
Kado Lussi Freestanding Bath
4x
24H
Place the bath on two wooden blocks over the waste
connections. Connect the waste. Fill the bath with water
and check for leakage.
Place the wedges in position.
The wedges can now be
disposed of.
Care and Maintenance:
• Repairing a scratch: If any scratches occur during installation these can be removed by rubbing with a 1500+grit water-
proof abrasive paper and water.
• Repolish the surface afterwards using a neutral automotive colour restorer or household metal polish. For best results
limit sanding to the smallest possible area around the scratch.
• It may be possible to polish very fine scratches away without using abrasive papers: scrubbing gently with a soft brush or
plastic pad (not metal scouring pad) and a mildly abrasive cream cleaner. Afterwards scrub the whole area with plenty of
clean water and re-polish as before.
Everyday cleaning
• For general cleaning use soapy water or an approved cleaner for solid surfaces.
• For a deeper periodic clean, to maintain the matte surface a cleaning and maintenance kit is supplied.
• Damage caused by any improper treatment is not covered by the product warranty. Refer to Warranty Conditions.
page 4 of 4
Plumbers, please ensure a copy of the installation instructions
is left with the end user for future reference
