reechcraft.com/powerlift 888-600-6160
25
11. Front Outrigger
12. Stabilizer
13. Rear Outrigger
14. Outrigger Storage Socket
15. Bubble Level
16. Chassis
17. Anchor Point/Extension Cord Throughway
3.0
Introduction
This section details the operation and setup of the machine, as well as methods of
maneuvering, transportation, and storage.
Note:
The manufacturer has no direct control over the machine application and operation.
The operator is responsible for following sound safety practices.
3.1
Machine Description
The ReechCraft PowerLift is a drill-powered aerial work platform (AWP). The removable
platform is mounted to an elevating climbing unit that combines up to four modular
mast sections that are stacked and fixed to a base mast that is connected to a base. The
machine is stabilized in different ways, depending upon the base. The PowerLift’s intended
purpose is to provide personnel and their tools access to work areas above the ground.
SECTION 3
MACHINE OPERATION
Figure 3.0
- Outrigger Base Option
17
10
14
5
8
4
11
9
3
15
13
3
6
7
2
1. Climbing Unit
2. Intermediate Mast
3. Outrigger Socket
4. Manual Descent Crank
5. Platform
6. Gearbox
7. Platform Entry Gate
8. Platform Retaining Pin
9. Outrigger Retaining Pin
10. Top Mast
Legend
12
1
16
