PowerLift by ReechCraft
32
ALWAYS MAINTAIN A FIRM GRIP WHEN HANDLING THE MAST SECTIONS.
Joining Mast Sections
Elevate the climbing unit approximately three inches (80 mm) past the top of the mast and
carefully remove the mast section from its stowed position.
Figure 3.7
-
Joining Mast Sections
4. With the cam lever in the down position,
be sure the cam lever lock springs
automatically into the locked position.
1. Stack the mast, ensuring that the track is
aligned and facing toward the platform.
2. Rotate the cam lever lock until it stops in
the center position.
3. Press both cam levers down and in at
the same time.
Cam
Lever
Lock
Track
Cam
Lever
1
2
3
4
MACHINE OPERATION
SECTION
3
