PowerLift by ReechCraft
38
Figure 4.0
- Manual Descent Crank Operation
Rotate
Counterclockwise
Mount Clip
If the battery of the drill should run out of charge or if there is a loss of power to the
corded drill before the platform has fully descended:
• Remove the drill and place it inside the platform.
• Remove the manual descent crank from the mounting clip inside the platform.
• Engage the drive shaft with the manual descent crank.
• Wind counterclockwise until the platform lowers fully. (See Figure 4.0)
Discharged Battery or Loss of Power
EMERGENCY PROCEDURES
SECTION
4