reechcraft.com/powerlift 888-600-6160
51
S MAINTENANCE
SECTION
6
The following information is provided to assist you in the use and application of service
and maintenance procedures contained in this chapter.
WHEN AN ABNORMAL CONDITION IS NOTED AND PROCEDURES CONTAINED WITHIN
THIS MANUAL DO NOT SPECIFICALLY RELATE TO THE NOTED IRREGULARITY, USE OF
THE MACHINE SHOULD BE STOPPED AND A QUALIFIED MECHANIC WITH PROPER
KNOWLEDGE SHOULD CORRECT THE IRREGULARITY BEFORE WORK IS RESUMED.
Safety and Workmanship
Your safety, and that of others, is the first consideration when engaging in the maintenance
of equipment. Always be conscious of moving components and pinch points. Do not allow
heavy objects to rest in an unstable position. When raising a portion of the machine, ensure
that adequate support is provided.
Cleanliness
The single most important item in preserving the long service life of a machine is to keep
foreign materials out of the vital components. Reasonable precautions have been taken to
safeguard against this. However, these areas must be maintained on a scheduled basis in order
to preserve proper function of the machine.
Component Disassembly and Reassembly
When disassembling or reassembling a component, complete the procedural steps in
sequence. Do not partially disassemble or reassemble one part and then start another.
Always recheck your work to assure that nothing has been overlooked. Do not make any
adjustments, other than those recommended, without obtaining proper approval.
6.3
Ser Maintenance Guidelines
