reechcraft.com/powerlift 888-600-6160
55
SECTION 7
TROUBLESHOOTING
7.0
Introduction
This section contains troubleshooting information to be used for locating and correcting
most of the operating problems which may develop in the machine. If a problem should
develop which is not presented in this section, qualified guidance should be obtained
before proceeding with any maintenance.
Troubleshooting Procedures
The troubleshooting procedures applicable to the product are listed and defined in Table 7.0.
Each malfunction within an individual group or system is followed by a listing of probable
causes which will enable the determination of the applicable corrective action. The
probable causes and corrective action should, where possible, be checked in the order
listed in Table 7.0.
It should be noted that there is no substitute for thorough knowledge of the equipment
and related systems.
It should be recognized that the majority of the problems arising in the machine will be
centered in the power system. For this reason, every effort has been made to ensure that
all likely problems in these areas are given the fullest possible treatment. In the remaining
machine groups, only those problems which are symptomatic of greater problems which
have more than one probable cause and remedy are included. This means that problems
for which the probable cause and remedy may be immediately obvious are not listed in
this section.
