44
PowerMast by ReechCraft
• Operation should only be carried out by a competent person in compliance with
all local, state, and federal requirements. Be sure you are wearing the appropriate
personal protective equipment (PPE) while operating the system.
• Load any necessary equipment, tools, and materials securely onto the system.
Be sure to keep walkways free of obstructions.
• Re-examine the entire work environment above and below the platform to ensure
there are no obstructions or personnel in the way of operation.
• While lifting the platform, always keep hands free from any moving parts.
(See Figure 5.0)
• Lift the platform by placing the drill in the forward (clockwise) position and
pulling the trigger. Release the trigger to stop.
• Always allow the lock lever to ratchet while lifting the work platform. (See Figure 5.1)
Figure 5.0
- Moving Parts
Figure 5.1
- Lock Lever with Ratchet
• Two people are preferred to
operate a twin mast system.
Always keep the platform level
while working on the platform.
If only one person is on the
platform, it is allowable to adjust
the platform up to 10 degrees
to reposition the platform to a
different height. (See Figure 5.2)
Lock Lever
with Ratchet
Two People
Lift and Lower
Simultaneously
SECTION 5
OPERATING THE SYSTEM
Figure 5.2
- Operating the Work Platform
5.0
Operating the Work Platform
Moving
Parts
