10
2.
Press the button again to display the minimum value.
3.
Press the button a third time to resume normal operation.
Note:
The meter will automatically exit MAX/MIN mode if no key is
pressed within 10 seconds.
Auto Power Off
To preserve battery life, the meter is programmed to turn itself off after 5
minutes of inactivity. The auto power off function does not apply when the
meter is datalogging.
Battery Replacement
When the low battery indicator appears on the LCD, the batteries must
be replaced.
1.
Using a Phillips head screwdriver, remove the screw on the back of
the meter.
2.
Remove the battery cover.
3.
Replace the 4 x AAA batteries.
4.
Secure the battery cover in place and tighten the screw.
Accessories and Replacement Parts
•
R1110
Test Probe Set
•
R1210
Alligator Clip Set
•
R8888
Medium Hard Carrying Case
Don't see your part listed here? For a complete list of all accessories and
replacement parts visit your product page on www.reedinstruments.com.
Product Care
To keep your instrument in good working order we recommend the following:
• Store your product in a clean, dry place.
• Change the battery as needed.
• If your instrument isn't being used for a period of one month or longer
please remove the battery.
• Clean your product and accessories with biodegradable cleaner. Do not
spray the cleaner directly on the instrument. Use on external parts only.
REED Instruments
1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com
