10
A) Press the
REC
button once and the maximum value will appear
on the display as indicated by "REC MAX".
B) Press the
REC
button again and the minimum value will appear
on the display as indicated by "REC MiN".
C) To exit recording mode and resume normal operation, press and
hold the
REC
button for two seconds.
When in recording mode the
POWER
button is disabled
and the meter cannot be turned off.
Backlight
After powering the meter ON, the LCD Backlight will turn on automatically.
Press the BACKLiGHT button to turn the LCD Backlight on or off.
Setup Mode
1. Press and hold the
SET
button for 2 seconds to enter Setup Mode.
2. Press the
SET
button continuously to scroll through the
following parameters.
Parameter
Description
Sd F
Format the SD memory card
dAtE
Set the time and date
SP-t
Set the data logging sampling rate
PoFF
Enable or disable the auto-power off function
bEEP
Turn the beeper on or off
dEC
Set the decimal format (USA (20.00) or European (20,00))
t-CF
Select the temperature unit of measure (°C or °F)
t-SEt
Set pH manual Temp. compensation value, pH only
ESC
Exit Setup mode
3. Once the appropriate parameter has been selected, follow the
instructions below.
Note:
At any time, you can press the
ESC
button to exit the Setup mode
and resume normal operation.
continued...
REED Instruments
1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com