15
Automatic Data Logging Mode
In automatic mode the desired data logging sampling rate is set to 1, 2,
5, 10, 30, 60, 120, 300, 600, 1800 or 3600 seconds prior to recording. In
order to setup the meter for automatic data logging, follow steps
1 through 4 below.
1. To begin a data logging session press and hold the LOG button for
2 seconds. The meter will scan for a SD memory card.
Note
: If a card is not inserted or the card is defective, the meter will flash
"Sd -E-" indefinitely. In this case, power the meter OFF and try again with
another SD memory card or verify that the SD card is correctly inserted.
2. While in a data logging session, the "LoG" icon will appear on the
LCD, while the REC icon will continuously flash.
3. To pause the data logging session press the LOG button and REC
will stop flashing. To resume press the LOG button again.
4. To end the current data logging session press and hold the LOG
button for 2 seconds.
Transferring Data from the SD Memory Card to a Computer
1. While the meter is powered Off remove the SD memory card from the
SD card slot.
2. Insert the SD memory card into the computer.
3. Open the file(s) with Excel. See sample below:
Place
Date
Time
Value
Unit
1
19-07-10
10:39:08
886
LUX
2
19-07-10
10:39:09
886
LUX
3
19-07-10
10:39:11
169
LUX
4
19-07-10
10:39:13
1036
LUX
5
19-07-10
10:39:15
999
LUX
6
19-07-10
10:39:17
25
LUX
7
19-07-10
10:39:19
991
LUX
8
19-07-10
10:39:21
960
LUX
9
19-07-10
10:39:23
969
LUX
10
19-07-10
10:39:25
30
LUX
11
19-07-10
10:39:27
999
LUX
12
19-07-10
10:39:29
971
LUX
13
19-07-10
10:39:31
985
LUX
continued...
REED Instruments
1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com
