reedinstruments
www
com
3
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black
Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
Safety
•
Complies with IEC61010 safety measurement requirement in pol-
lution degree 2, overvoltage category (CAT. IV 600V) and double
insulation
•
Do not apply more than 600V to this meter
•
Do not use this meter around explosive gas, vapor, or dust
•
Do not use this meter in a wet environment
•
When using the test leads, keep your fingers away from the lead
contacts, behind the finger guards
•
Do not use this meter with any parts or cover removed
•
Do not come in contact the circuit under test while taking mea-
surements
•
Do not use this meter if it is damaged or parts are exposed; look
for cracks or missing plastic
•
Be careful when working above 30V rms
•
Discharge all circuits after measuring high voltage
•
Place test leads in their proper input terminals
•
Make sure all the test leads are firmly connected to the input
terminals
•
Make sure the insulation resistance tester is turned off when
opening the battery compartment
•
Do not change the battery when in a wet environment
•
Do not use or store this meter in high temperatures, humidity,
explosive environments, and near strong magnetic fields
•
Dry this meter before storing if wet
•
When not in use, set the range selector switch to the “OFF”
position and remove the test leads
•
Remove the batteries if the instrument is not used for a long
period of time
www.reedinstruments.com
1-877-849-2127 | info@reedinstruments.com
