3
INSTRUMENTS
INSTRUMENTS
5. Take care when making measurements if the voltages are greater
than 25VAC rms or 35VDC. These voltages are considered a shock
hazard.
6. Always discharge capacitors and remove power from the device
under test before performing Diode, Resistance or Continuity tests.
7. Remove the battery from the meter if the meter is to be stored for
long periods.
Features
• Autoranging multimeter and non-contact voltage detector
• Built-in flashlight
• Diode check and continuity functions
• Auto power off and data hold
• Double molded housing and test leads
• CAT III 1000V, CAT IV 600V safety rating
• Includes test leads and batteries
Instrument Description
1. Non-contact AC voltage
detector probe tip
2. Non-contact AC voltage
indicator light
3. 3 1/2 Digit (2000 count)
4. MODE button
5. Function switch
6. Flashlight
7. Flashlight button
8. Data Hold button
9. Battery Cover
10. Test leads
REED Instruments
1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com
