reedinstruments
www
com
10
Calibration Software
When the microphone or the replacement microphone cause an offset in
the reading measurement, the software needs to be calibrated, To begin
this process click on this “ ” icon. The following window will appear:
The “Ajustment Value” is a single calibration value, ranging from -12.5 to
12.5, the value 1.0 is equivalent to 1dB.
Assuming that the reading is 0.5dB higher than the standard value, the
“Ajustment Value” should be set to -0.5.
Press “OK”. The following window will appear:
