reedinstruments
www
com
3
Features
This Sound Level Datalogger is designed for noise assessment; quality
control; illness prevention as well as detection and measurement of all
environmental sounds. Ideal for measuring the sound levels in factories;
schools; offices; high traffic areas, households, and more.
• This unit conforms to the IEC61672-1 CLASS2 for Sound Level Meters
• NORM (Normal) & PEAK mode
• Data manage: STORE/REAL TIME
• Over range indication
• A & C Weighting
• FAST & SLOW response
• Calibration Software
• Manual & Automatic start
Notes:
• In NORM (Normal) mode, 20 readings will be picked (one reading per
50ms) and the average value of the 20 readings will be stored. At the
same time, a peak max. & a peak min. will be picked wihtin all the
sampling data. If sampling rate takes longer than 10 seconds, the unit
will turn itself off before reaching sampling time to save battery power.
• In PEAK mode, the DataLogger will always measure data at 50 micro-
second intervals. The PEAK value means the MAX. and MIN. reading of
the measurement but not the MAX. and MIN. sampling value. The stored
sampling value is the MAX. of the 20 readings but not the average.
For service on this or any other REED product, contact REED Instruments
at info@reedinstruments.com.
