reedinstruments
www
com
Pantone 485 & 123
485 = (0/100/100/10)
123 = (0/18/100/0)
Buttons
1-. Up.button.(for.EMS,HAL,LAL,LOG)
2-. MODE.button.(for.cycling.through.the..
.
mode.loop)
3-. Down.button.(for.EMS,HAL,LAL,LOG)
4-. Laser/Backlight.On/Off.button.(pull.trigger..
.
and.press.button.to.activate.laser/backlight)
MODE Button Function
This.infrared.thermometer.measures.Maximum.(MAX),.
Minimum.(MIN),.Differential.(DIF),.and.Average.(AVG).Tem-
peratures..Each.time.you.take.a.reading,.this.data.is.stored.
and.can.be.recalled.with.the.MODE.button.until.a.new.
measurement.is.taken..When.the.trigger.is.pulled.again,.
the.unit.will.begin.measuring.in.the.last.mode.selected.
Pressing.the.MODE.button.also.allows.you.to.access.
the.High.Alarm(HAL),.Low.Alarm(LAL),Emissivity(EMS).
and.data.logger(LOG).
MODE -
.Each.time.you.press.MODE,.you.advance.
through.the.mode.cycle..Pressing.the.MODE.button..
also.allows.you.to.access.the.Type.K.Temperature.
Measurement.
The.diagram.on.the.left.shows.the.sequence.of..
functions.in.the.MODE.cycle
Switching C/F, LOCK ON/OFF & SET ALARM
1-.. C/F
2-.. LOCK.ON/OFF
3-.. SET.ALARM
Select.the.temperature.units.(°C.or.°F)..
by.using.the°C/°F.switch