reedinstruments
www
com
7
Temp (type-K)
-58 to
1832°F
1°F
±(1.0% r 4.5°F)
±(1.0% r 2.5°C)
(probe accuracy not included)
-50 to
1000°C
1°C
4-20mA%
-25 to
125%
0.01%
±50 digits
0mA=-25%, 4mA=0%, 20mA=100%, 24mA=125%
Note: Accuracy specifications consist of two elements:
• (% reading) – This is the accuracy of the measurement circuit
• (+ digits) – This is the accuracy of the analog to digital converter
Enclosure:
Double molded, waterproof
Shock (Drop Test):
6.5 feet (2 meters)
Diode Test:
Test current of 0.9mA maximum, open circuit
voltage 2.8V DC typical
Continuity Check:
Audible signal will sound if the resistance is less
than 35Ω (approx.), test current <0.35mA
Peak:
Captures peaks >1ms
Temperature Sensor:
Requires type K thermocouple
Input Impedance:
>10MΩ VDC & >3MΩ VAC
AC Response:
True RMS
AC True RMS:
The term stands for “Root-Mean-Square”,
which represents the method of calculation of
the voltage or current value.
Average responding multimeters are calibrated
to read correctly only on sine waves and they
will read inaccurately on non-sine wave or
distorted signals. True rms meters read
accurately on either type of signal
ACV Bandwidth:
50Hz to 1000Hz
Crest Factor:
≤3 at full scale up to 500V, decreasing linearly
to ≤1.5 at 1000V
Display:
40,000 count backlit liquid crystal with bargraph
Overrange indication:
“OL” is displayed
Auto Power Off:
15 minutes (approximately) with disable feature
Polarity:
Automatic (no indication for positive); Minus (-)
sign for negative
Measurement Rate:
2 times per second, nominal
continued ...
