Reef Octopus Space Saving Bio pellets Reactor
：
：
BR
1
000SS
Instruc
ti
on
：
Reef Octopus Space Saving Bio-pellets Reactor uses the design that Subvert the tradi
ti
onal, making it works on
a crazy e
ff
ect. It just uses a pump that has only 1000L per hour water
fl
ow driving as much as 1500ml
Bio-pellets. It is en
ti
rely due to its bo
tt
om direct injec
ti
on water
fl
ow style.
To prevent pellets get into the pump, our engineer
invented a Umbrella-shaped device, it only has 1.5mm gap,
matched with the bowl-shaped bo
tt
om, make bio-pellets
been totally s
ti
rred but can’t get into the reactor’s bo
tt
om.
The cover of it is an easy removable design, could turn the
outlet at four direc
ti
ons. There also have a Sieve plate
screwed on the cover to prevent pellets
fl
owed out of the
chamber.
Installa
ti
on
：
1. There should have 4 li
tt
le packages in the box, the main
chamber, the outlet part , the pump and water inlet valve.
2. Fix the outlet onto the cover.
3. Open the pump box, install the pump directly into the
bo
tt
om. As the picture shows
4. Added enough medias to the chamber.
5. Connect the pump to power.
How to Adding Medias.
1.Make sure the Umbrella-shaped devices is
already
Installed
on the bo
tt
om before you added media, it will
prevent the medias get into the pump.
2. Loose the screws that
fi
xed the cover, remove the
cover, added medias in.
3. Be sure the O-ring is in the O-ring groove on the top
of the chamber. Put the cover on and
ti
ghten the screws
Safety
：
1. Please use the pump under marked voltage;
2. Don’t added medias which diam is less than 2mm
;
3.
Never take maintains of the devices when it is running.
4. Keep enough water level, prevent the pump working without water.
t injec
ti
on water
fl
ow style.
engineer
.5mm gap,
bio-pellets
s bo
tt
om.
d turn the
ieve plate
out of the
ox, the main
inlet valve.
y into the
dy
a, it will
the
e top
he screws
ge;
h
2
