www.
reefe
.com.au
Ascento Group Australia
©
AI.062020
P: 1800 807 604
WARRANTY &
INSTRUCTION MANUAL
**PLEASE LEAVE THIS GUIDE IN A SAFE PLACE FOR THE OWNER**
IMPORTANT INSTALLATION GUIDELINES
Mandatory installation condition: the premises where the pump is installed, and the power circuit to
which it is connected, must be protected by an rcd (safety switch) – do not install pumps without this
protection.
• All parts shown are WaterMarked & certified for Potable Water
• Fittings may differ from the image shown due to variations in design
• Do not adjust the PRV, warranty is void if adjusted
• Read and follow the instructions in the pages following
IMPORTANT:
If installing close to a wall or other fixture, use barrel-union connections to allow removal
if ever required.
®
RM1500-2 | RM1600-2
SUBMERSIBLE PUMP SYSTEM WITH RPS AND
RAINPRO RM1500-2 or RM1600-2 RAIN TO MAINS BACKUP VALVESET
WMK LICENCE:
WM-022109
AUSTRALIAN STANDARD:
WMTS-477
WaterMark Quality System Doc # RQS.1059 Ver.20190925
MAINS WATER
DISCHARGE
RM BODY
DUAL CHECK VALVE
ADDITIONAL
OUTLET PORT
1/8 BSP PLUG
BRASS TAIL
DN25 NUT
END CAP
