28
5. Safety Instructions
The guarantee/warranty will be void if damage is incurred resulting from non-compliance with
the operating instructions. We do not accept any liability for consequential damages!
Nor do we assume liability for damage to property or personal injury caused by improper use or
the failure to observe the safety instructions! In such cases the guarantee is voided.
Normal wear and tear during operation (e.g. worn tires) is excluded from the guarantee and
warrantee, the same is the case for accidental damage (e.g. broken off transverse link, scratched
or destroyed car body etc.).
Dear Customer, the following safety instructions are intended not only for the protection of the product,
but also for your own safety and the safety of other persons. Therefore read this chapter very carefully
before putting the product into operation!
a) General Information
• The unauthorized conversion and/or modification of the product is prohibited for safety and approval reasons (CE).
• The product is not a toy and should be kept out of reach of children under 14 years of age.
• The product must not get damp or wet.
• Taking out private liability insurance is recommended. If you already have such insurance, get some information
whether the operation of a model is covered by your insurance.
• Do not leave the packaging material lying around carelessly, as such materials can become dangerous toys in the
hands of children.
• Should questions arise that are not answered with the help of this operating manual, contact us (contact information
see chapter 1) or another expert.
The operation and the handling of remote control model cars must be learned! If you have never operated
such a vehicle, drive especially carefully and get used to the reactions of the car to the remote control
commands first. Be patient!
b) Operation
• Every time before you use the product, make sure that there are no other models operated within the range and on
the same frequency as the transmitter. Otherwise you will loose control of the remote-controlled models! Always use
different frequencies.
• Every time you operate the car the settings of the trim regulator for forward/reverse drive as well as those for steering
must be checked, and if necessary, modified.
This is why the wheels of the car must not be placed on the ground yet when the car is put into operation; place the
model on a suitable base which allows the wheels to turn freely (don’t put your hands in the drive!).
After that, adjust the trim so that the motor no longer turns when you let go of the lever for forward/reverse operation
or until the steering assembly is straight (the precise settings for driving straight can be carried out later on whilst
driving).
