23
12. Flip Function
The quadrocopter is able to fly flips as well if desired. The first flips should be flown outdoors on a wind-still day. For
this, first let the quadrocopter rise to a safety height of approx. 3 - 4 m and then let it hover.
To switch the transmitter to flip mode, briefly push the
button for the flip function (also see figure 1, item 4).
To indicate that the transmitter is now switched to flip
mode, it will emit a brief signal and the transmitter LED
will briefly go out and come back on.
Now move the control stick for the nod and roll func-
tion into the direction in which the quadrocopter is to flip
quickly to the stop and then return the control stick to he
middle position without delay.
The quadrocopter will perform the flip in the desired di
-
rection and the transmitter will then end flip mode.
For another flip, you need to push the flip function push
-
button again.
When the LEDs at the quadrocopter flash because the flight battery has dropped below its lower voltage
threshold, the flip function is deactivated.
Figure 15