23
d) Operation with the App
When the quadrocopter is ready to start (see preceding chapter c) and the App is activated in your Smartphone with
"Play" (see figure 13, item 3), you will receive a live image from the quadrocopter camera. You can start at once and
– if desired – fly the quadrocopter in FPV mode using the camera images.
"Binding" the two devices is successful if the LEDs in the quadrocopter's landing struts remain lit and the
LED on the bottom of the housing of the model flashes. The display now shows the operating elements of
the App and the video image of the camera installed in the model. Choose "On" (see figure 14, item 9), in
order to conceal the control elements.
Additionally, you can take a picture with the quadrocopter camera or start a video recording with the video camera
symbol (figure 14, item 3) on the display of your Smartphone before or during operation of the quadrocopter by select
-
ing the camera symbol (see figure 14, item 2).
You cannot use the app to take serial pictures. The camera is activated when you touch the camera icon
(figure 14, item 2). A picture will be created after releasing the symbol. Stop video recording by selecting
the video camera icon (figure 14, item 3) again.
e) Viewing Pictures or Videos
When you have stopped flying, you can view the first pictures or videos on your Smartphone right away. For this,
choose the corresponding symbol on your Smartphone (figure 14, item 4). New screen content will appear.
Select either "Pictures" or "Video". Depending on your selection, another screen content will appear with the saved
pictures or videos. You can open them for viewing by tapping them. To delete pictures or videos, select the corre-
sponding file (touch it for a longer time) and then following the screen instructions.
f) Operating the Quadrocopter with your Smartphone
The quadrocopter "Q Pro FPV" can be operated with your Smartphone alone rather than via the enclosed
transmitter as well. There are two options that will be described below. The function descriptions are pre-
sented and explained in mode 2. When switching to mode 1, observe the notes in chapters 11 and 13 as
well.
Just as when using the remote control transmitter, you can also record pictures and videos when using your Smart-
phone for operation.
For interference-free transmission of the control and video signals, no other transmitters must be present
in the 2.4 GHz transmission range of the model. The "Bluetooth
®
" function in the Smartphone must be
deactivated.
Do not violate the privacy of others when recording pictures and videos. You must only make recordings for
your personal use. Publications of any kind may require consent of the owner or the persons shown in the
image. In any case, observe the laws of your country.
The model will react a little more slowly to the control commands of your Smartphone and – because it is
not the usual – not quite as precisely as when controlled with the remote control transmitter. Therefore,
ensure that your flight area has no obstacles. Be patient when controlling your model with a Smartphone.