24
3
Steering function
The steering function enables you to steer forwards, backwards, left and right.
To move forwards, move your hand downwards at an angle of more than 15 degrees.
To move backwards, move your hand upwards at an angle of more than 15 degrees.
To turn left, tilt your hand left at an angle of more than 15 degrees.
To turn right, tilt your hand right at an angle of more than 15 degrees.
15°
15°
15°
4
Orientation function
The orientation function turns the drone to face in a different direction.
To face left, press and hold the finger button (4) and turn your hand left at an angle of more than 15 degrees.
To face right, press and hold the finger button (4) and turn your hand right at an angle of more than 15 degrees.
Important!
• The remote control can communicate with the drone when it is up to 30 metres away. Make sure you keep within
this range. If the drone goes out of range or the signal is lost, the fail-safe function will automatically land the drone.
d)
Practical flight tips for beginners
Although the drone can be flown in small spaces, we recommend choosing an unobstructed space at least 5 metres
wide and 3 metres high for the first few flight attempts.
Position yourself directly behind the drone. This ensures that the drone reacts to remote control commands (left, right,
forwards and backwards) exactly as you see them.
Important!
If the rotors hit any objects and become trapped, or the drone tips over, switch off the rotor motors immediately. To do
this, press and hold the remote control button (2) until the motors come to a stop.
Never attempt to stop the motors when the drone is flying, as this will cause the drone to fall to the ground and may
damage the components.
Never attempt to grab the drone with your hands when it is in the air, as this may cause an injury.
When the LED lights on the drone start to flash, this indicates that the battery is low. We recommend that you imme
-
diately land the drone and recharge the battery to prevent it from running out mid-flight.
Allow the drone battery and drone to cool down before charging or replacing the battery.