5
5. Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
6. Safety instructions
Read the operating instructions carefully and especially observe the safety information. If you do
not follow the safety instructions and information on proper handling in this manual, we assume
no liability for any resulting personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
Normal wear and tear in operation and damage due to accidents (like the receiver aerial being torn off, the
receiver casing broken etc.) are excluded from the warranty.
Location
• Do not operate in the following locations:
- Any location where interference from other radio controlled activity may occur.
- Near power lines or communication broadcasting antennas.
- Near people or roads.
- On any body of water when passenger boats are present.
• Do not use the product at night or in bad weather such as rain or thunderstorms.
Before use
• Set the Fail-safe. See "d) Fail-safe (safety mechanism)" on page 14.
• Turn the transmitter ON first, and then turn the receiver ON. This will prevent loss of control.
• Check the transmitter batteries have sufficient charge to avoid losing control of the model.
• Check all servos and their connections.
During use
• Make sure the model stays within the transmission range to prevent loss of control.See "a)
Transmitter (TX)" on page 18.
After use
• Turn the receiver OFF first, and then turn the transmitter OFF. This will prevent loss of
control.
• Do not touch any part of the model that may generate heat. The engine, motor, or speed
controller can become hot enough to cause burns!
