48
5. Scope of Delivery
Figure 1
1) Pre-assembled QuadroCopter
2) Four spring washers M3
3) Two left-turning propellers
4) Two right-turning propellers
5) Four rotor tips
6) Hook-and-loop tape
7) Plug-in connector for rechargeable battery
8) Aerial tube
Not illustrated: Operating instructions
The spare parts list is located on our website www.conrad.com in the download section for the respective
product. Alternatively, you may also request the spare parts list on the phone. For contact information,
please refer to the top of these instructions in the chapter „Introduction“.
The following components not included in delivery are required for assembly and operation:
Assembly:
Soldering iron and the necessary kit.
Operation:
To operate the model, a simple 5 channel remote control, a 3 cellular LiPo flight battery with approx. 2500 mAh and a
discharge rate of 25 C as well as a compatible LiPo charging device with LiPo balance charger are required.
You will find tried and tested suitable kit in the QuadroCopter accessories set that is especially designed
for beginners and which can be found in our catalogue or at our website www.conrad.com.
Summary of Contents for 450 ARF QC09
Page 166: ...166 ...
Page 167: ...167 ...