6
1. Before taking the quadrocopter into operation, ensure that the flight
battery is charged completely and the batteries in the transmitter still have
enough voltage.
2. Before powering on remote controller, please keep the joystick for the
pitch function in the bottom position.
3. Please ensure quadrocopter is successful binded before operation. First
connect the flight battery to the quadrocopter electronics plug connection
with protection against polarity reversal. The LED on the quadrocopter
flashes quickly, then switch on the remote control transmitter with the
function switch. This starts the binding process, after which transmitter
and receiver use the same digital code. If binding is completed, the LED
remains lit.
4. Do not take any risks when operating the product! Your own safety and
that of your environment is solely down to you being responsible when
dealing with the model. Improper operation may cause serious injury and
property damage! Therefore make sure to keep a sufficiently safe distance
to persons, animals or objects during operation.
Notice:
Only use the charger provided
Notice:
Never attempt to power the charger from an AC outlet without the use
of a proper AC to DC adapter/ power supply.
3.7V 730mah
Charging line
LED
1-cell 3.7V Variable Rate DC Li-Po Charger
Instruction:
Please only recharge LiPo flight battery with the supplied AC
charger. Connect the battery to charger wire as per below
illustration only.
Battery Charging
First Flight preparation CAUTION
