13
10. Operating the quadrocopter
a)
Charging the flight battery
The flight battery can be charged using the included USB charging cable.
The charging cable in Figure 4 is wound up for photo-technical reasons. Before first use, remove the cable
tie and fully unwind the charging cable.
Charging:
Connect the USB plug of the charging cable (1) to a USB
port of a computer/laptop or a USB charger plug.
The LED charging indicator on the USB plug (2) will go on
to indicate that the USB charging cable is supplied with
the correct voltage.
Connect the 2 mm barrel connector (3) of the charging
cable to the charging socket (4) of the flight battery (5).
Charging will now start automatically and the LED charg-
ing indicator on the USB plug (2) will go out.
The red LED on the USB plug will go on when the flight
battery is fully charged.
Disconnect the charging cable from the flight battery im
-
mediately after charging and unplug the USB plug of the
charging cable from the computer/laptop or charger plug.
Caution!
Do not connect the USB cable to a USB hub
without its own power supply (e.g. a USB port
on a keyboard), as the current is not sufficient
to charge the flight battery.
The operating system will not recognise any new hardware
when the charging cable is connected, as the USB port
is only used to charge the flight battery. Please note that
most USB ports on computers/laptop are only active when
the computer/laptop is turned on.
We therefore recommend that you only connect the charging cable to a computer/laptop that is turned on.
Important!
Only charge the flight battery in the quadrocopter using the included charging cable. Never attempt to
charge the rechargeable battery in the quadrocopter with a different or unsuitable charger!
Figure 4
Summary of Contents for Foldable Drone G-Sense
Page 1: ...Operating Instructions Electrical quadrocopter Foldable Drone G Sense RtF Item No 1697439 ...
Page 41: ...41 ...
Page 42: ...42 ...
Page 43: ...43 ...