14
b) Folding the rotor arms in and out
Four propeller arms can be folded in for space-saving transport (see Figure 5 A).
When unfolding, the two front propeller arms must first be folded out as viewed in flight direction (see Figure 5 B). The
arms will automatically lock into place in the end position.
Then the two rear propeller arms can be folded out as viewed in flight direction (see Figure 5 C).
Figure 5
First the two rear propeller arms and then the two front propeller arms are folded in for transport.
c) Attaching the propeller guard
The quadrocopter comes with two plastic guards (1) that
ensure protection against rotating propellers.
Slide the plastic guards over the landing legs from below
until the two latches (2) lock into place on the guard holder
of each motor.
For better illustration, Figure 6 shows a guard already
mounted.
To disassemble the guard, slightly open the two latches
on each motor with a fingernail or a small screwdriver and
push down the holder.
Important note:
Even when the quadrocopter is shown without
the protective guard in these instructions for il-
lustrative purposes, you should always use the
quadrocopter with the propeller guards mount-
ed for safety reasons.
Figure 6
Summary of Contents for R5-Foldable FPV Drone RtF
Page 1: ...Operating Instructions Electrical quadrocopter R5 Foldable FPV Drone RtF Item No 1714585 ...
Page 41: ...41 ...
Page 42: ...42 ...
Page 43: ...43 ...
