8
b)
Before first use
• Select a suitable location to fly the helicopter.
•
When switching the quadrocopter on, always follow the procedure outlined in a separate section of these
instructions. This ensures that the remote control and receiver connect properly and that the model
responds reliably to remote control commands.
• Ensure that there are no other models operating on the same frequency (2.4 GHz) within range of the
remote control. Always check whether there are any other 2.4 GHz remote control systems that may
interfere with the model.
•
Conduct regular checks to verify that the model and remote control are safe to use. Inspect the parts for
any signs of damage, such as broken connectors or damaged cables.
All moving parts on the model should move freely, but there must be not any slackness in the bearing.
•
Check that the rotors are secure and in the correct position before each use.
• The flight battery must be charged before use.
• Always ensure that the batteries in the transmitter have sufficient capacity remaining (see transmitter
LED). If the batteries are empty, replace all of the batteries at the same time. Never replace individual
batteries.
c) During use
•
Do not take any risks when using the product! Always use the model responsibly, otherwise you may
endanger yourself and your surroundings.
• Improper use can cause serious injury and damage to property! Ensure that you maintain a sufficient
distance from people, animals and objects. Never try to grab the flying model with your hand!
• Only fly the model when you are fully alert and able to respond. Fatigue, alcohol and medication can
affect your ability to respond.
•
Keep objects and body parts away from the rotors when the rotors are moving.
• Do not fly the model towards spectators or towards yourself.
• Never try to grab hold of the flying quadrocopter with your hands.
• Motors, flight regulator and flight battery alike can become hot during operation. For this reason, take
a 5 to 10 minute break before recharging the flight battery or restarting the model with a charged spare
battery.
•
Always leave the remote control (transmitter) switched on when the model is in use. After landing, always
switch off the quadrocopter first before you switch off the remote control.
•
Never switch the transmitter off during operation while the quadrocopter is still running.
•
Do not expose the model or the remote control to direct sunlight or excessive heat for prolonged periods.
•
In the event of a severe crash (e.g. from a high altitude), the electronic gyro sensors may be damaged.
Always check that the model is functioning properly before flying it again!
•
In the event of a crash, switch off the rotor motors immediately. Rotating rotors may be damaged if they
come into contact with obstacles or in the event of an impact. Check the rotors for any signs of cracks or
damage before flying the model again!
•
To avoid damaging the model due to a crash caused by an undervoltage/overdischarging of the battery,
monitor the undervoltage indicators during the flight.
Summary of Contents for R5-Foldable FPV Drone RtF
Page 1: ...Operating Instructions Electrical quadrocopter R5 Foldable FPV Drone RtF Item No 1714585 ...
Page 41: ...41 ...
Page 42: ...42 ...
Page 43: ...43 ...
