76
h) Switching the video system
The video transmitter can operate in PAL or NTSC. We recommend keeping the PAL system for compatibility with
the video goggles.
If, however, you do need to change the system, proceed as follows:
Start up the quadrocopter.
Press and hold the setting push button (see Figure 26, no. 3) for approx. 5 seconds.
The blue LED (see Figure 26, no. 5) will flash after 2 seconds and go out after a further 3 seconds.
If you now release the setting push button, the PAL system switches to the NTSC system or from the NTSC system
to the PAL system.
When the PAL system is activated, a flashing blue LED (7) close to the 5.8 GHz radio antenna will be
visible when the quadrocopter is operational. When the NTSC system is activated, the blue LED lights up
permanently.
Important!
Before the first FPV flight, check the radio range and the quality of the video signal.
