OPERATION AND TECHNICAL DATA
SIGNALS
LED
COLOUR
STATUS
CONDITION
1 Yellow
On
2 Red
On
System activated. Initial TEST.
1
Yellow
On
3
Green
On
TEST condition
Em
itter
3
Green
On
Normal operation
LED
COLOUR
STATUS
CONDITION
4 Yellow
On
5
Red
On
6
Red
On
System activated
7
Green
On
Protected area clear
5
Red
On
Protected area engaged
Rec
eiver
4
Yellow
On
Weak signal received
NOTE:
For a description of the signalings in case of FAIL, please refer to the
“
TROUBLESHOOTING
” paragraph in this manual (page 23).
Figure 16
Î
On the emitter of the multibeam models, near each beam, is present a red led
which permits an easy detection of the beam.
EMITTER
RECEIVER
