13
4.
Select a heat setting by touching the “-”
、
“+” Or touching the
“
slider
”
control.
•
If you don’t choose a heat setting within 1 minute, the Induction hob will
automatically switch off. You will need to start again at step 1.
•
You can modify the heat setting at any time during cooking.
When you have finished cooking
1.
Touching the heating zone selection that you wish to
switch off
2.
Turn the cooking zone off by scrolling down to”0” or Or touching the
“
slider
”
.
Make sure the display shows”0”.
3.
Turn the whole cooktop off by touching the ON/OFF
control.
4.
Beware of hot surfaces
“H” will show which means cooking zone is too hot to touch. It will disappear
when the surface has cooled down to a safe temperature. It can also be used as an
energy saving function if you want to heat further pans, use the hotplate that is still
hot.
Using Boost function (for induction hob only)
Activate the boost function
1. Select the zone with boost function (front left zone).
2. Touching the plus key OR OR until power level indication
shows “P”.
OR OR
