Technical data
8 — English
— 03.09.2020 - Rev. A
Location Signal
evaluation
Message text
Fault memory
entry
Priority
Signal on the input triggers the following action
OUTPUTS
4
Changeover
contact
---
---
---
•
Maximum pressure exceeded
•
"ER 10" message in the controller
5
Changeover
contact
---
---
---
Switches in manual mode
Switches in stop mode
Switches with inputs 3,5,6 active
6
Changeover
contact
Make-up fault
---
---
•
Make-up setting values exceeded.
•
Switches the following messages in the device controller:
•
"ER 06", Make-up time
•
"ER 07", Make-up cycles
•
"ER 11", Make-up quantity
•
"ER 15", Make-up valve
•
"ER 20", Maximum make-up quantity
5.3
Replacing the fuses
DANGER
Risk of electric shock!
Risk of serious injury or death due to electric shock. Some parts of the main
board may still carry 230 V voltage even with the device physically isolated
from the 230 V power supply.
•
Before you remove the covers, completely isolate the device controller
from the power supply.
•
Verify that the main circuit board is voltage-free.
Fusing is provided on the I/O module's main circuit board.
1
Microfuse F1 (250 V, 0, 16 A slow)
Proceed as follows:
1.
Disconnect the I/O module from the power supply.
•
Pull the power plug from the bus module.
2.
Open the terminal space cover.
3.
Remove the housing cover.
4.
Replace the defective fuse.
5.
Re-attach the housing cover.
6.
Close the terminal space cover.
7.
Reconnect the power supply for the module.
The fuse replacement is completed.
6
Technical data
6.1
Control unit
Note!
The following values apply for all control units:
–
Permissible flow temperature:
–
Permissible operating temperature:
–
Permissible ambient temperature:
–
Permissible operating gauge pressure:
–
Dimensions (H x W x D) mm
–
Degree of protection
–
Number of RS-485 interfaces
–
I/O module
120 °C
70 °C
0 °C – 45 °C
10 bar
415 x 395 x 520
IP 54
1
optional
Type
Electrical
power [kW]
Power
supply
[V / Hz; A]
Control unit
electrical
voltage [V;
A]
Sound
level [dB]
Weight
[kg]
RS 90/1 T
0.7
230 / 50; 3
230; 2
72
32
RS 90/2
1.5
230 / 50;
6.5
230; 2
72
45
RS 150/1
1.1
400 / 50; 5
230; 2
72
45
RS 150/2
2.2
400 / 50;
10
230; 2
72
60
RS 300/1
2.2
400 / 50;
10
230; 2
76
48
RS 300/2
4.4
400 / 50;
19
230; 2
76
86
RS 400/1
2.4
400 / 50;
10.5
230; 2
76
62
RS 400/2
4.8
400 / 50;
21
230; 2
76
118
RS 580/1
3.0
400 / 50;
13
230; 2
76
102
RS 580/2
6.0
400 / 50;
26
230; 2
76
196
6.2
Tanks
Primary vessel
Secondary vessel
Cooke Industries - Phone: +64 9 579 2185 Email: sales@cookeindustries.co.nz Web: www.cookeindustries.co.nz
