Restore Factory Default:
The menu item deletes all settings made and restores the default
settings. Before the execution, a password query takes place.
1.
Enter the password
.
2.
Confirm the confirmation prompt with the
"ENTER"
key or
the
"EXIT"
key to cancel.
3.
The device then starts with the initial installation.
Information:
The menu item displays model, hardware and software information.
Software Update:
Perform a software update using an update file via USB cable. When
available.
USB-MENU
To access the USB menu, press the
"SETUP"
button and select the
menu item USB with the
"◄ / ►"
buttons.
Multimedia:
1.
Use the
"▲ / ▼"
buttons to navigate to the
"MULTIMEDIA"
menu item.
2.
Confirm the entry with the
"ENTER"
key.
3.
The device enters USB mode.
4.
Now you can access data that exists on the USB stick.
Note:
The menu item can also be accessed via the
"SOURCE"
button.
ERROR SULUTION
Problem
Possible reasons
What should I do
No picture
Electricity is not
connected
Connect to the power
adapter
The power switch is off
Press the power
button
Screen shows no
signal
DVB-T cable / antenna
is not connected
DVB-T cable /
antenna is not
connected
No sound from the
speaker
Sound is mute
Wrong audio format
Disable mute function
/ Select a different
sound format
Only sound, no
picture
Wrong setting radio
program selected
Press the button "TV /
Radio"
Remote control
does not respond
The batteries are empty
Replace battery
Remote control does
not show to the device
Hold remote control to
the device
The device is too far
away
Move closer to the
device with the remote
control
Suddenly no
picture anymore
(mosaic education)
The received signal is
too weak
Amplify the signal.
Other position of the
antenna